????
Your IP : 3.142.211.95
#!/bin/sh
cd `dirname "$0"`
. ./functions.sh
if [ $? != 0 ]; then
echo [ERROR] Can not include 'functions.sh'.
exit 1
fi
test_license()
{
COPY_LICENSE_KEY=1
if [ -f "$LSWS_HOME/conf/serial.no" ]; then
if [ ! -f "$LSINSTALL_DIR/serial.no" ]; then
cp "$LSWS_HOME/conf/serial.no" "$LSINSTALL_DIR/serial.no"
else
diff "$LSWS_HOME/conf/serial.no" "$LSINSTALL_DIR/serial.no" 1>/dev/null
if [ $? -ne 0 ]; then
COPY_LICENSE_KEY=0
fi
fi
fi
# if [ $COPY_LICENSE_KEY -eq 1 ]; then
# if [ -f "$LSWS_HOME/conf/license.key" ] && [ ! -f "$LSINSTALL_DIR/license.key" ]; then
# cp "$LSWS_HOME/conf/license.key" "$LSINSTALL_DIR/license.key"
# fi
# if [ -f "$LSWS_HOME/conf/license.key" ] && [ -f "$LSINSTALL_DIR/license.key" ]; then
# diff "$LSWS_HOME/conf/license.key" "$LSINSTALL_DIR/license.key"
# if [ $? -ne 0 ]; then
# cp "$LSWS_HOME/conf/license.key" "$LSINSTALL_DIR/license.key"
# fi
# fi
# fi
if [ -f "$LSINSTALL_DIR/license.key" ] && [ -f "$LSINSTALL_DIR/serial.no" ]; then
echo "License key and serial number are available, testing..."
echo
bin/lshttpd -V
if [ $? -eq 0 ]; then
LICENSE_OK=1
if [ -f "$LSINSTALL_DIR/conf/license.key" ]; then
mv "$LSINSTALL_DIR/conf/license.key" "$LSINSTALL_DIR/license.key"
bin/lshttpd -t
fi
fi
echo
fi
if [ "x$LICENSE_OK" = "x" ]; then
if [ -f "$LSINSTALL_DIR/serial.no" ]; then
# echo "Serial number is available."
# printf "Would you like to register a license key for this server? [Y/n]"
# read TMP_YN
# echo ""
# if [ "x$TMP_YN" = "x" ] || [ `expr "$TMP_YN" : '[Yy]'` -gt 0 ]; then
echo "Contacting licensing server ..."
echo ""
$LSINSTALL_DIR/bin/lshttpd -r
if [ $? -eq 0 ]; then
echo "[OK] License key received."
$LSINSTALL_DIR/bin/lshttpd -t
if [ $? -eq 0 ]; then
LICENSE_OK=1
else
echo "The license key received does not work."
fi
fi
# fi
fi
fi
if [ "x$LICENSE_OK" = "x" ]; then
if [ -f "$LSINSTALL_DIR/trial.key" ]; then
$LSINSTALL_DIR/bin/lshttpd -t
if [ $? -ne 0 ]; then
exit 1
fi
else
cat <<EOF
[ERROR] Sorry, installation will abort without a valid license key.
For evaluation purpose, please obtain a trial license key from our web
site http://www.litespeedtech.com, copy it to this directory
and run Installer again.
If a production license has been purchased, please copy the serial number
from your confirmation email to this directory and run Installer again.
NOTE:
Please remember to set ftp to BINARY mode when you ftp trial.key from
another machine.
EOF
exit 1
fi
fi
}
configChroot()
{
ENABLE_CHROOT=0
CHROOT_PATH="/"
if [ -f "$LSWS_HOME/conf/httpd_config.xml" ]; then
OLD_ENABLE_CHROOT_CONF=`grep "<enableChroot>" "$LSWS_HOME/conf/httpd_config.xml"`
OLD_CHROOT_PATH_CONF=`grep "<chrootPath>" "$LSWS_HOME/conf/httpd_config.xml"`
OLD_ENABLE_CHROOT=`expr "$OLD_ENABLE_CHROOT_CONF" : '.*<enableChroot>\(.*\)</enableChroot>.*'`
OLD_CHROOT_PATH=`expr "$OLD_CHROOT_PATH_CONF" : '[^<]*<chrootPath>\([^<]*\)</chrootPath>.*'`
if [ "x$OLD_ENABLE_CHROOT" != "x" ]; then
ENABLE_CHROOT=$OLD_ENABLE_CHROOT
fi
if [ "x$OLD_CHROOT_PATH" != "x" ]; then
CHROOT_PATH=$OLD_CHROOT_PATH
fi
fi
CHANGE_CHROOT=0
if [ $INST_USER = "root" ]; then
CHANGE_CHROOT=1
if [ $INSTALL_TYPE = "upgrade" ]; then
CHANGE_CHROOT=0
if [ $ENABLE_CHROOT -eq 1 ]; then
cat <<EOF
Chroot is enabled with your current setup and root directory is set to
$CHROOT_PATH
EOF
else
echo "Chroot is disabled with your current setup."
echo
fi
printf "%s" "Would you like to change chroot settings [y/N]? "
read TMP_URC
echo ""
if [ "x$TMP_URC" != "x" ]; then
if [ `expr "$TMP_URC" : '[Yy]'` -gt 0 ]; then
CHANGE_CHROOT=1
fi
fi
fi
if [ $CHANGE_CHROOT -eq 1 ]; then
cat<<EOF
LiteSpeed Web Server Enterprise Edition can run in chroot environment.
It is impossible for the chrooted process and its children processes to
access files outside the new root directory.
With chroot configured properly, there is no need to worry about sensitive
data being accidentally exposed by insecure CGI programs or web server itself.
Even when a hacker some how gain a shell access, all files he can access is
under the chrooted directory.
This installation script will try to setup the initial chroot environment
automatically.
However, it is not easy to setup a chroot environment and you CGI program may
break. So we do not recommend enabling it for the first time user.
It can be enabled later by running this installation script again.
EOF
SUCC=0
printf "%s" "Enable chroot [y/N]: "
read TMP_YN
if [ `expr "x$TMP_YN" : 'x[Yy]'` -gt 1 ]; then
ENABLE_CHROOT=1
fi
LSWS_HOME_LEN=`expr "$LSWS_HOME" : '.*'`
if [ $ENABLE_CHROOT -eq 1 ]; then
while [ $SUCC -eq 0 ]; do
cat <<EOF
Chroot path must be absolute path and the server root
$LSWS_HOME
must be included in the chroot directory tree.
EOF
printf "%s" "Chroot directory without trailing '/': "
read TMP_CHROOT
if [ "x$TMP_CHROOT" != "x" ]; then
if [ $TMP_CHROOT = '/' ]; then
echo "Set chroot directory to '/' will disable chroot."
printf "%s" "Are you sure? [y/N]"
read TMP_YN
if [ `expr "x$TMP_YN" : 'x[Yy]'` -gt 1 ]; then
ENABLE_CHROOT=0
SUCC=1
fi
else
CHROOT_LEN=`expr "$TMP_CHROOT" : '.*'`
MATCH_LEN=`expr "$LSWS_HOME" : "$TMP_CHROOT"`
if [ $CHROOT_LEN -ne $MATCH_LEN ]; then
echo "Server root is not included in the chroot directory tree"
else
TMP_CHROOT2="$TMP_CHROOT/"
TMP_HOME="$LSWS_HOME/"
MATCH_LEN=`expr "$TMP_HOME" : "$TMP_CHROOT2"`
if [ $MATCH_LEN -le $CHROOT_LEN ]; then
echo "Server root is not included in the chroot diretory tree"
else
SUCC=1
CHROOT_PATH=$TMP_CHROOT
fi
fi
fi
fi
done
fi
fi
fi
}
changeChroot()
{
util_cpfile "$SDIR_OWN" $EXEC_MOD admin/misc/chroot.sh
if [ $CHANGE_CHROOT -eq 1 ]; then
if [ $ENABLE_CHROOT -eq 1 ]; then
$LSWS_HOME/admin/misc/chroot.sh $CHROOT_PATH
$LSWS_HOME/admin/misc/chroot.sh $CHROOT_PATH $LSWS_HOME/bin/lshttpd
$LSWS_HOME/admin/misc/chroot.sh $CHROOT_PATH $LSWS_HOME/admin/fcgi-bin/admin_php5
$LSWS_HOME/admin/misc/chroot.sh $CHROOT_PATH $LSWS_HOME/bin/lscgid
if [ -f $LSWS_HOME/fcgi-bin/php ]; then
$LSWS_HOME/admin/misc/chroot.sh $CHROOT_PATH $LSWS_HOME/fcgi-bin/php
fi
$LSWS_HOME/admin/misc/chroot.sh $CHROOT_PATH $LSWS_HOME/fcgi-bin/lsphp
if [ `expr "x$CHROOT_PATH" : '^x/[^/]'` -gt 1 ]; then
cp $CHROOT_PATH/etc/passwd $CHROOT_PATH/etc/passwd.ls_bak
cp $CHROOT_PATH/etc/group $CHROOT_PATH/etc/group.ls_bak
egrep "$WS_USER|lsadm" /etc/passwd > $CHROOT_PATH/etc/passwd
grep "$WS_GROUP" /etc/group > $CHROOT_PATH/etc/group
fi
fi
cp $LSWS_HOME/conf/httpd_config.xml $LSWS_HOME/conf/httpd_config.xml.bak
chown "$DIR_OWN" $LSWS_HOME/conf/httpd_config.xml.bak
RES=`grep '</chrootPath>' $LSWS_HOME/conf/httpd_config.xml.bak`
if [ $? -eq 1 ]; then
sed -e "s#</group>#</group><chrootPath>$CHROOT_PATH</chrootPath><enableChroot>$ENABLE_CHROOT</enableChroot>#" "$LSWS_HOME/conf/httpd_config.xml.bak" > "$LSWS_HOME/conf/httpd_config.xml"
else
sed -e "s#<chrootPath>.*<\/chrootPath>#<chrootPath>$CHROOT_PATH<\/chrootPath>#" -e "s/<enableChroot>.*<\/enableChroot>/<enableChroot>$ENABLE_CHROOT<\/enableChroot>/" "$LSWS_HOME/conf/httpd_config.xml.bak" > "$LSWS_HOME/conf/httpd_config.xml"
fi
fi
}
installLicense()
{
if [ -f ./serial.no ]; then
cp -f ./serial.no $LSWS_HOME/conf
chown "$SDIR_OWN" $LSWS_HOME/conf/serial.no
chmod "$DOC_MOD" $LSWS_HOME/conf/serial.no
fi
if [ -f ./license.key ]; then
cp -f ./license.key $LSWS_HOME/conf
chown "$SDIR_OWN" $LSWS_HOME/conf/license.key
chmod "$CONF_MOD" $LSWS_HOME/conf/license.key
fi
if [ -f ./trial.key ]; then
cp -f ./trial.key $LSWS_HOME/conf
chown "$SDIR_OWN" $LSWS_HOME/conf/trial.key
chmod "$DOC_MOD" $LSWS_HOME/conf/trial.key
fi
}
portOffset()
{
SUCC=0
SEL=0
while [ $SUCC -eq "0" ]; do
cat <<EOF
Would you like to run LiteSpeed along side with Apache on another port
to make sure everything work properly? If yes, please set "Port Offset"
to a non-zero value, LiteSpeed will run on Port 80 + "Port Offset",
otherwise, set to "0" to replace Apache.
EOF
printf "%s" "Port Offset [2000]? "
read TMPS
echo ""
if [ "x$TMPS" != "x" ]; then
if [ `expr "$TMP_PORT" : '.*[^0-9]'` -gt 0 ]; then
echo "[ERROR] Only digits is allowed, try again!"
else
AP_PORT_OFFSET=$TMPS
SUCC=1
fi
else
SUCC=1
fi
done
}
enablePHPsuExec()
{
SUCC=0
SEL=0
while [ $SUCC -eq "0" ]; do
cat <<EOF
PHP suEXEC will run php scripts of each web site as the user who own the
document root directory,
LiteSpeed PHP suEXEC does not have any performance penalty like other PHP
suEXEC implementation, and .htaccess configuration overriden has been fully
supported.
Note: You may need to fix some file/directory permissions if phpSuexec or
suphp was not used with Apache.
Would you like to enable PHP suEXEC?
0. No
1. Yes
2. Only in user's home directory (DirectAdmin should use this)
EOF
printf "%s" "Please select (0-2)? [2]"
read TMPS
echo ""
if [ "x$TMPS" != "x" ]; then
if [ `expr "$TMPS" : '[012]'` -gt 0 ]; then
PHP_SUEXEC=$TMPS
SUCC=1
else
echo "[ERROR] Wrong selection, try again!"
fi
else
SUCC=1
fi
done
}
hostPanelConfig()
{
SETUP_PHP=1
portOffset
enablePHPsuExec
}
hostPanels()
{
SUCC=0
SEL=0
while [ $SUCC -eq "0" ]; do
cat <<EOF
Will you use LiteSpeed Web Server with a hosting control panel?
0. NONE
1. cPanel
2. DirectAdmin
3. Plesk
4. Hsphere
5. Interworx
6. Lxadmin
7. ISPManager
EOF
printf "%s" "Please select (0-7) [0]? "
read TMPS
echo ""
if [ "x$TMPS" != "x" ]; then
if [ `expr "$TMPS" : '[01234567]'` -gt 0 ]; then
SEL=$TMPS
SUCC=1
PANEL_VARY=""
if [ $SEL -eq "1" ]; then
HOST_PANEL="cpanel"
WS_USER=nobody
WS_GROUP=nobody
if [ -e "/etc/cpanel/ea4/is_ea4" ] ; then
PANEL_VARY=".ea4"
fi
elif [ $SEL -eq "2" ]; then
HOST_PANEL="directadmin"
WS_USER=apache
WS_GROUP=apache
elif [ $SEL -eq "3" ]; then
HOST_PANEL="plesk"
USER_INFO=`id apache 2>/dev/null`
TST_USER=`expr "$USER_INFO" : 'uid=.*(\(.*\)) gid=.*'`
if [ "x$TST_USER" = "xapache" ]; then
WS_USER=apache
WS_GROUP=apache
else
WS_USER=www-data
WS_GROUP=www-data
# default PID FILE, source the real one, debian and ubuntu different
APACHE_PID_FILE=/var/run/apache2/apache2.pid
. /etc/apache2/envvars
PANEL_VARY=".debian"
fi
ADMIN_PORT=7088
elif [ $SEL -eq "4" ]; then
HOST_PANEL="hsphere"
WS_USER=httpd
WS_GROUP=httpd
elif [ $SEL -eq "5" ]; then
HOST_PANEL="interworx"
WS_USER=apache
WS_GROUP=apache
elif [ $SEL -eq "6" ]; then
HOST_PANEL="lxadminh"
WS_USER=apache
WS_GROUP=apache
elif [ $SEL -eq "7" ]; then
HOST_PANEL="ispmanager"
WS_USER=apache
WS_GROUP=apache
fi
fi
DIR_OWN=$WS_USER:$WS_GROUP
CONF_OWN=$WS_USER:$WS_GROUP
else
SUCC=1
fi
done
}
LSINSTALL_DIR=`dirname "$0"`
cd $LSINSTALL_DIR
init
license
install_dir
test_license
admin_login
if [ $INSTALL_TYPE = "reinstall" ]; then
configAdminEmail
if [ $INST_USER = "root" ]; then
hostPanels
fi
if [ "x$HOST_PANEL" = "x" ]; then
getUserGroup
stopLshttpd
getServerPort
getAdminPort
configRuby
enablePHPHandler
else
hostPanelConfig
fi
fi
if [ "x$HOST_PANEL" = "x" ]; then
configChroot
fi
cat <<EOF
Installing, please wait...
EOF
if [ "x$HOST_PANEL" = "xdirectadmin" ]; then
chmod g+x /var/log/httpd/
chgrp apache /var/log/httpd/
chown apache:apache /var/log/httpd/domains
fi
if [ "x$HOST_PANEL" = "x" ]; then
buildConfigFiles
else
buildApConfigFiles
fi
installation
installLicense
if [ "x$HOST_PANEL" = "x" ]; then
changeChroot
# setupPHPAccelerator
installAWStats
fi
finish